Happy Thanksgiving!

November 26, 2013

This year I am thankful for our latest round of prototypes.

The prototypes have reached a complexity level where each new round is a significant undertaking.  It takes three people (Andrew, Chip, and me) working simultaneously for an entire day to adjust the patterns, cut the fabrics, and assemble the parts.  Then it takes Chip another 8-10 hours of sewing on his own to finish them up.  That’s for just one piece each of the duffle and pannier.

With updated bag prototypes and the “wedge” system prototype in hand, this week we finally had an opportunity to assemble and test the entire system on a bike.

Marking mounting holes on the wedge:

IMG_3916

Routing the wedge:

IMG_3932

Mounting frame on the pannier:

IMG_3936

Hein finished the CAD model of our mounting bracket.  These are off to a machine shop for quotes.  In the meantime we used a set of steel brackets that we found at Ace.

IMG_3940

Mounting the wedge:

IMG_3950

We packed-out the bags with moto camping gear.  We specifically used items that are oddly shaped, bulky, or heavy.  For example a tool roll, spare tubes, stove, tent, thermarest, sleeping bag, etc.

IMG_3943

We added two fuel bottles filled with unleaded gas in the exterior pocket:

IMG_3945

You can fit a lot in these panniers.  Almost too much, confirming that we need to design a smaller version too.

IMG_3946

This was as heavy as I would ever pack a pannier.  The bags held their shape well due to the built-in taper and interior stiffeners.

IMG_3961

Took them out for a spin:

IMG_3963

IMG_4009-crop

Checked the contact points in a slide:

IMG_3989

Excess strap lengths are still an open issue.  We got some great ideas from advrider.com, which will be incorporated into the factory sample.

IMG_3998

Tested on a bigger bike as well:

IMG_4250-crop

ride-GS

Backpack straps:

IMG_3955

Another option for fuel storage using molle:

IMG_4259

While we could continue tweaking and improving these designs on our own, we expect a lot of things to change in a manufacturing environment.  We’d prefer to develop future prototypes together with a factory.  To accomplish that, we need to build a duplicate set of prototypes to send overseas, transfer our paper patterns onto mylar film, and formalize the part lists and spec sheets.  That should keep us busy for a few weeks, after which we’ll regroup on the smaller-size and rackless bags.

In the meantime, Galen (apparel designer) has been working behind the scenes to get some outerwear concepts for 2015 on the table for discussion.  Hopefully we’ll have something to look at in the next few weeks.

Happy Thanksgiving!!

Advertisements

4 thoughts on “Happy Thanksgiving!

    1. moskomoto Post author

      Yes, we worry about that a bit. But once the product is out there on the market its visible for everyone to see anyway. So we decided to be 100% transparent about the PD process and see how it goes. The cool thing is that we’ve been getting lots of real time input and feedback on advrider.com, which we can then incorporate immediately into the designs.

      Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s